Konica Minolta kn-304 Manual De Usuario
KN-304 Network Board 2-5
Chapter 2 Setting up from the LCD Panel
●
Set IP mode
Select [1. Set IP mode] from the TCP/IP Setup menu: the [DHCP Menu] window appears.
Select [1. Enable DHCP] to use DHCP and [2. Disable DHCP] otherwise. Press [Previous] to go back to the
previous menu.
●
IP Settings
If you have selected [2.Disable DHCP] in the DHCP Menu, it is needed to define an IP address, subnet
mask and gateway and to enable the IP address defined.
As you select [2. IP Settings] in the TCP/IP Setup menu, the screen will appear as follows. You have to
define all of the four items. Press the number key associated with the corresponding menu item and enter
a value. Press [Previous] to go back to the previous menu.