National Instruments NI 783xR Manuel D’Utilisation

Refer to Appendix B, 

, for more information about 

using these cables and accessories to connect I/O signals to the NI 783xR. 
Refer to 

ni.com/products

 or contact the sales office nearest to you for 

the most current cabling options.

NI offers a variety of cables for connecting signals to the NI 783xR. If you 
need to develop a custom cable, a nonterminated shielded cable is available 
from NI. The SHC68-NT-S connects to the NI 783xR VHDCI connectors 
on one end of the cable. The other end of the cable is not terminated. This 
cable ships with a wire list identifying the wires that correspond to each 
NI 783xR pin. Using this cable, you can quickly connect the NI 783xR 

NSC68-262650

Non-shielded cable connects 
from 68-pin VHDCI male 
connector to two 26-pin 
female headers plus one 
50-pin female header. The 
pinout of these headers 
allows for direct connection 
to 5B backplanes for analog 
signal conditioning and SSR 
backplanes for digital signal 
conditioning.

MIO only

26-pin headers can connect 
to the following 5B 
backplanes for analog signal 
conditioning:

• 5B08 (8-channel)

• 5B01 (16-channel)

50-pin header can connect to 
the following SSR 
backplanes for digital signal 
conditioning:

• 8-channel backplane

• 16-channel backplane

• 32-channel backplane

NSC68-5050

Non-shielded cable connects 
from 68-pin VHDCI male 
connector to two 50-pin 
female headers. The pinout 
of these headers allows for 
direct connection to SSR 
backplanes for digital signal 
conditioning.

DIO only

50-pin headers can connect 
to the following SSR 
backplanes for digital signal 
conditioning:

• 8-channel backplane

• 16-channel backplane

• 32-channel backplane

Table 1-2.  Cables and Accessories (Continued)

NI 783xR