National Instruments NI 783xR Manuel D’Utilisation
Chapter 1
Introduction
© National Instruments Corporation
1-7
Cables and Optional Equipment
National Instruments offers a variety of products you can use with R Series
devices, including cables, connector blocks, and other accessories, as
shown in Table 1-2.
devices, including cables, connector blocks, and other accessories, as
shown in Table 1-2.
Table 1-2. Cables and Accessories
Cable
Cable Description
NI 783xR
Connector
Accessories
SH68-C68-S
Shielded 68-pin VHDCI
male connector to female
0.050 series D-type
connector. The cable is
constructed with 34 twisted
wire pairs and an overall
shield.
male connector to female
0.050 series D-type
connector. The cable is
constructed with 34 twisted
wire pairs and an overall
shield.
MIO or DIO
Connects to the following
standard 68-pin screw
terminal blocks:
standard 68-pin screw
terminal blocks:
• SCB-68
• CB-68LP
• CB-68LPR
• TBX-68
SHC68-68-RMIO
Shielded 68-pin VHDCI
male connector to female
0.050 series D-type
connector. The cable is
constructed with individually
shielded twisted-pairs for the
analog input channels plus an
additional shield around all
the analog signals. This cable
provides superior noise
immunity on the MIO
connector.
male connector to female
0.050 series D-type
connector. The cable is
constructed with individually
shielded twisted-pairs for the
analog input channels plus an
additional shield around all
the analog signals. This cable
provides superior noise
immunity on the MIO
connector.
MIO only
Connects to the following
standard 68-pin screw
terminal blocks:
standard 68-pin screw
terminal blocks:
• SCB-68
• CB-68LP
• CB-68LPR
• TBX-68