Cisco Systems AS5350 Manuel D’Utilisation
3-4
Cisco AS5350 Universal Gateway Chassis Installation Guide
78-10754-03 0A
Chapter 3
Installing the Cisco AS5350
Setting Up the Chassis
Required Tools and Equipment
You need the following tools and equipment to rack-mount the chassis:
•
Number 2 Phillips screwdriver (not included)
•
Medium flat-blade screwdriver (not included)
•
Screws for attaching the chassis to the rack (not included)
•
Standard rack-mount brackets (included)
•
Screws for attaching the brackets to the chassis (included)
Figure 3-2
Standard Rack-Mount Brackets
Attaching the Brackets
To attach the mounting brackets to the chassis, follow this procedure:
Step 1
Set the chassis on a flat surface. (See Figure 3-3.)
Note
The chassis may be installed with either the front or rear panel facing forward.
Step 2
Attach the standard 19 or 23-inch rack brackets to the sides of the chassis. Use the screws provided with
the mounting brackets. (See Figure 3-3.)
the mounting brackets. (See Figure 3-3.)
Note
There are three sets of mounting holes on the sides of the chassis. Attach the brackets for front,
rear, or middle mounting.
rear, or middle mounting.
Figure 3-3
Standard Bracket Installation—Front Panel Forward
36012
Bracket for 23-inch rack
Bracket for 19-inch rack
35669
Note: The second bracket attaches to the other side of the chassis.
The chassis can also be installed with the rear panel forward.
The chassis can also be installed with the rear panel forward.