Furuno back gp-80 Manuel D’Utilisation

The demo display provides simulated opera-
tion of this unit. Own ship tracks, at the speed
selected, a figure eight course, starting from
position entered. All controls are operative;
you may change course, enter marks, etc.

1) While pressing and holding down [NU/CU

ENT], turn on the power. After the test re-
sults appear, the Simulation Mode menu
appears.

2) Key in latitude of initial position.

3) If necessary, press [

] to switch from

north latitude to south latitude or vice
versa.

4) Key in longitude.

5) If necessary, press [

] to switch from east

longitude to west longitude or vice versa.

6) Press ▼ key.

7) Key in speed.

8) Press the [NU/CU ENT] key to start the

simulation mode.

The icon 

 appears in the plotter 1, 2,

and highway display. All controls are op-
erative.

Note: The return to the normal mode, turn off
the power and then turn it on while  pressing
and holding down [NU/CU ENT] key.

Note: When the memory is cleared while in
the demonstration mode, the equipment starts
up in the normal mode.

_ _°

DEMO SETTING

ENT: Enter

: Column

: Cursor

_ _._ _ _' N  _ _ _°_ _._ _ _' W

 BASE POSITION

SPEED
             00.00kt

: N/S, E/W