Navigon 21xx max Manuel D’Utilisation

User’s Manual NAVIGON 21xx max 

- 34 - 

Navigation  

The R

 window opens. 

The starting point of a route is the point at which you want to begin your 
trip. This is not necessarily the current location. If you are planning a 
route for your holidays at home, you could, for example, enter your 
hotel as the starting point. 
The starting point is only important if you want to see a planned route 
on the map but currently have no GPS reception, or if you are not 
currently at the planned starting point. This is why your selected starting 
point has the flow number "0". 
As soon as you start navigation, your current location will be used as 
the starting point for the route calculation. 
The first leg of the route is therefore the journey to the route point with 
flow number "1". 
1.  Tap on the Specify Starting Point box. 

The S

 menu opens. 

If you want to enter your current location as the starting point: 

2.  Tap on the Current Position menu item. 

If you want to enter a different starting point: 

2.   Tap on the corresponding button. 

3.  Enter the starting point. (Refer to the corresponding section of 

chapter "Specifying a destination" on page 23 ff.) 

4.  Tap on Set Starting Point. 

The selected starting point will now be displayed next to the 0 
button (Starting Point). 

► 

Tap on the Specify Starting Point box. 

The S

 menu opens. You can now enter a different 

starting point. Proceed as described above. 

The route points of a route are the destinations that you want to 
navigate to. 
The flow number for each route point is indicated on a button in front of 
it. 
1.  Tap on the Add Route Point box. 

The R

 menu opens.