FMI (V)QM42(SR,SI,HR,HI) Manuel D’Utilisation

Page de 36
www.fmiproducts.com
122275-01G
9
AIr For CoMBUsTIoN ANd VeNTIlATIoN
Continued
1.  Determine the volume of the space (length 
x width x height).
 
Length x Width x Height =__________cu. ft. 
(volume of space)
 
Example: Space size 22 ft. (length) x 18 ft. 
(width) x 8 ft. (ceiling height) = 3,168 cu. ft. 
(volume of space)
 
If  additional  ventilation  to  adjoining  room 
is supplied with grills or openings, add the 
volume of these rooms to the total volume 
of the space. 
2.  Multiply the space volume by 20 to determine 
the maximum Btu/Hr the space can support.
 
  ________ (volume of space) x 20 = (Maxi-
mum Btu/Hr the space can support)
 
Example: 3,168 cu. ft. (volume of space) x 20 = 
63,360 (maximum Btu/Hr space can support)
3.  Add the Btu/Hr of all fuel burning appliances 
in the space.
 
Vent-free fireplace     _________ Btu/Hr
 
Gas water heater*     _________ Btu/Hr
 
Gas furnace 
   _________ Btu/Hr
 
Vented gas heater     _________ Btu/Hr
 
Gas fireplace logs     _________ Btu/Hr
 
Other gas appliances* +  _________ Btu/Hr
 
Total 
=  _________ Btu/Hr
 
* Do not include direct-vent gas appliances. 
Direct-vent draws combustion air from the 
outdoors and vents to the outdoors.
 
Example:
 
Gas water heater 
   _________ Btu/Hr
 
Vent-free fireplace  +  _________ Btu/Hr
 
Total 
=  _________ Btu/Hr
4.  Compare  the  maximum  Btu/Hr  the  space 
can support with the actual amount of Btu/Hr 
used.
 
  _______ Btu/Hr (maximum the space can 
support) 
 
  _______ Btu/Hr (actual amount of Btu/Hr 
used)
 
Example:  63,360  Btu/Hr  (maximum  the 
space can support)
 
 
79,000 Btu/Hr (actual amount of 
Btu/Hr used)
The space in the example is a confined space 
because the actual Btu/Hr used is more than the 
maximum  Btu/Hr  the  space  can  support. You 
must provide additional fresh air. Your options 
are as follows:
A.  Rework worksheet, adding the space of an 
adjoining room. If the extra space provides an 
unconfined space, remove door to adjoining 
room or add ventilation grills between rooms. 
See Ventilation Air From Inside Building.
B.  Vent  room  directly  to  the  outdoors.  See 
Ventilation Air From Outdoors, page 10.
C.  Install a lower Btu/Hr fireplace, if lower Btu/
Hr size makes room unconfined.
Figure 4 - Ventilation Air from Inside 
Building
If  the  actual  Btu/Hr  used  is  less  than  the 
maximum Btu/Hr the space can support, the 
space is an unconfined space. You will need 
no additional fresh air ventilation.
 WARNING: If the area in which 
the heater may be operated does 
not meet the required volume for 
indoor combustion air, combus-
tion and ventilation air shall be 
provided by one of the methods 
described in the National Fuel 
Gas Code, ANSI Z223.1/NFPA 54, 
the International Fuel Gas Code, 
or applicable local codes.
vENTILATION AIR
Ventilation Air From Inside Building
This fresh air would come from an adjoining 
unconfined  space.  When  ventilating  to  an 
adjoining unconfined space, you must provide 
two permanent openings: one within 12" of the 
ceiling and one within 12" of the floor on the 
wall connecting the two spaces (see options 
1 and 2, Figure 4). You can also remove door 
into adjoining room (see option 3, Figure 4). 
Follow  the  National  Fuel  Gas  Code,  ANSI 
Z223.1/NFPA  54,  Air  for  Combustion  and 
Ventilation  for  required  size  of  ventilation 
grills or ducts.
40,000
39,000
79,000
Or
Remove
Door into
Adjoining
Room,
Option
3
Ventilation Grills 
Into Adjoining Room,
Option 2
Ventilation
Grills Into
Adjoining 
Room,
Option 1
12"
12"