Furuno gp-31 Manuel D’Utilisation
3-4
Figure 3-11 Screen appearance when
MOB is set as destination
3.3 Displaying Waypoint Name
You may display on the plotter display all
waypoint names or only the GOTO
waypoint name as follows:
waypoint names or only the GOTO
waypoint name as follows:
1. Press the [MENU] key once or twice to
display the menu.
2. Select PLOTTER and press the [ENT]
key.
3. Place the cursor on the WYPT NAME
field and press the [ENT] key. The fol-
lowing window appears.
lowing window appears.
Figure 3-12 DSP GOTO, DSP ALL
selection window
4. Select DSP GOTO or DSP ALL as ap-
propriate and press the [ENT] key.
5. Press the [MENU] key twice to finish.
3.4 Editing Waypoints on the
WPTS/MRKS List
WPTS/MRKS List
Waypoint position, waypoint name, mark
shape and comment can be edited on the
WPTS/MRKS List.
shape and comment can be edited on the
WPTS/MRKS List.
1. Press the [MENU] key once or twice to
display the menu.
2. Select WAYPOINTS and press the
[ENT] key.
3. Select LIST or NEAREST and press the
[ENT] key.
4. Select waypoint to edit and press the
[ENT] key.
Note: CURSOR, MOB or START are
automatically updated according to
destination
automatically updated according to
destination
setting
or
MOB
setting.Therefore,editing these items
has no meaning.
has no meaning.
5. Select the NAME field and press the
[ENT] key.
6. Change name with the cursor pad and
press the [ENT] key. You are then asked
if you want to create or rename the
waypoint, or quit (escape) this display.
if you want to create or rename the
waypoint, or quit (escape) this display.
Figure 3-13 CREATE, RENAME prompt
7. Select objective and press the [ENT]
key.
8. Change position, mark shape, comment
as desired.
9. Select “Exit?” and press the [ENT] key.
10.Press the [MENU] key twice to finish.