Konica Minolta micropress release 6 Manuel D’Utilisation
20
If you select multiple chapters then change a setting, the name of the feature to display in green. This is a tempo-
rary indicator showing that changes will be made only to this setting in all the selected chapters.
rary indicator showing that changes will be made only to this setting in all the selected chapters.
Page Settings
Use this dialog to view or apply print options to individual pages of the selected job.
Note: Double-click on a job, then click on the Page Settings tab to display the Page Settings.
Field/Control
Description
Print Marked Chapters Only
Prints marked (consecutive) only.
Insert Sheet After Last Page
Inserts a blank page after the last page in the selected chapter.
Note: The insert sheet is not applied to the chapter but is a separate page added after the
chapter. Thus, deleting a chapter with an insert page will not delete the insert sheet. The
insert sheet will remain unless you manually delete it.
Note: The insert sheet is not applied to the chapter but is a separate page added after the
chapter. Thus, deleting a chapter with an insert page will not delete the insert sheet. The
insert sheet will remain unless you manually delete it.
Simplex Page Lock
Prevents a page from having anything printed on its back and from being printed on the
back of another page. Applies the feature to all pages in the chapter.
back of another page. Applies the feature to all pages in the chapter.
Feed Tray
Selects the paper tray from which the paper will be fed.
Destination
Selects the output tray for the job.
Margin Offset
Adjusts the Top and Left margins for each page .
Add
Includes a page or group of contiguous pages as a chapter.
Delete
Removes a chapter.
Field/Control
Description
Page Number
Chooses the page number to apply print options to.
Insert Sheet After This Page
Causes an additional blank page to be printed after the selected page. The blank page will
be pulled from the same location as Job and Copy Separators.
be pulled from the same location as Job and Copy Separators.
Feed Tray
Selects the paper tray from which the paper will be fed.
Destination
Selects the output tray for the printed job.
Gloss
Set the job Gloss Level for the selected page (Low, Standard, High). Note: You can set the
Gloss Level (312 only) for all pages in a job on the Job Settings tab.
Gloss Level (312 only) for all pages in a job on the Job Settings tab.
Simplex Page Lock
Prevents a page from having anything printed on its back and from being printed on the
back of another page.
back of another page.
End Staple Set
Allows groups of pages within a multi-page job to be stapled for output devices supporting
the feature.
the feature.
Note: It is not recommended to set End Staple Set for a range of less than 2 physical pages;
End Staple Set will be ignored if Stapling is set to “None” on the Finishing tab; only one type of
stapling per job is allowed. Both “Top Corner” and “Side” cannot be used within the same job,
for example.
End Staple Set will be ignored if Stapling is set to “None” on the Finishing tab; only one type of
stapling per job is allowed. Both “Top Corner” and “Side” cannot be used within the same job,
for example.
Toner Calculate
Click Calculate in the Toner section of the Job Settings or Page Settings tab to calculate the
toner coverage on all pages of the selected job.
Note: The Calculate Toner option on the Job Settings dialog box
displays the toner coverage for individual pages within the job.
When a number (#%) displays, the toner coverage has been calcu-
lated. When “0%” displays, the toner coverage is less than 0.5%.
When “-%” displays, the toner coverage has not been calculated.
toner coverage on all pages of the selected job.
Note: The Calculate Toner option on the Job Settings dialog box
displays the toner coverage for individual pages within the job.
When a number (#%) displays, the toner coverage has been calcu-
lated. When “0%” displays, the toner coverage is less than 0.5%.
When “-%” displays, the toner coverage has not been calculated.
Margin Offset
Adjusts the Top and Left margins for each page.
Lock Page
Prevents global changes to the document’s margin settings from affecting the selected
page.
page.