Hanna Instruments hi 8001 Manuel D’Utilisation
50
Y (yes) can be entered next to the selected condition to change the controller
state. Only the Y (yes) key will have effect in activating the appropriate state. This
panel displays and allows the setting of the following parameters:
Stop
state. Only the Y (yes) key will have effect in activating the appropriate state. This
panel displays and allows the setting of the following parameters:
Stop
Press Y (yes) then ENTER to place the controller in stop state.
Current controller status
Work
Work
Press Y (yes) then ENTER to place the controller in work state. If there are
certain alarm conditions it is not possible to enter WORK state.
certain alarm conditions it is not possible to enter WORK state.
Init
Press Y (yes) then ENTER to place the controller in initialization state.
5.8.4 OUTLET MAN CTRL – S 50
Number: 27
Opened: Y
Value: -
OUTLET MAN CTRL S50
In this panel the outlet number is used as the index. See Appendix 2 with outlet
assignment. This panel displays and allows the setting of the following param-
eters:
Number
assignment. This panel displays and allows the setting of the following param-
eters:
Number
Panel index. Outlet number.
Opened
The status of the indexed outlet.
Value
Press Y (yes) or N (no) to open or close the indexed outlet.
5.9 CUSTOMIZED SETTINGS
5.9.1 PH CTRL OPTIONS - S 51
Ctrl in Pre/Post Y
Use acid in pHCtrl Y
pH CTRL OPTIONS S51
This panel allows selection of pH control options. The control in “pre” and
“post” irrigation states as well as acid/base selection are selectable. This panel
displays and allows the setting of the following parameters:
“post” irrigation states as well as acid/base selection are selectable. This panel
displays and allows the setting of the following parameters: