eutech-instruments cyberscan con 11 conductivitytds meter Manuel D’Utilisation

Instruction Manual 

 

CON 11/110 

 

30

To manually print any data that is currently being measured:  

1.  From measurement mode, press HOLD/ENTER key 

to freeze reading. 

2.  Press PRINT (

 ) key. 

3.  The “Prn – CUr” annunciator will appear and flash 

for about 0.5 seconds. The data is transmitted to the 
printer or computer. 

4.  The meter returns to measurement mode. 
5.  Repeat steps 1 to 3 for next measurement.  

This feature is useful to automate printing and downloading 
‘live’ measurement values into computer. The time interval 
setting can range from 5 to 30 seconds.  

1.  From conductivity or TDS measurement mode, press 

PRINT (

) key.  

2. The “dAt/Cur” screen appears .Press the 

HOLD/ENTER key.  

3.  The “SEC 5” screen appears. The default value is 5 

seconds time interval.  

4. Press 

MI/▲ or MR/▼ key to set a value suitable for 

your application.  

5.  Press HOLD/ENTER key.  
6.  The meter goes into measurement mode with MEM 

annunciator flashing.  

7.  At a pre-set time interval, the screen flashes “Prn/CUr” momentarily (printing 

data) and switches back to measurement mode with MEM annunciator 
flashing.  

8.  To stop printing, press PRINT (

) key. The MEM annunciator disappears 

and the meter is on measurement mode.  

1413

22.3

µS

1413

22.3

µS

1413

22.3

µS

Flash for 0.5 seconds