Pentax Q10 Mode D’Emploi
53
Basic Operations
3
3
Position the subject inside the AF
frame, and press the shutter
release button halfway.
The autofocus system operates.
The AF frame turns green and you will hear
The AF frame turns green and you will hear
a beep when the subject comes into focus.
When set to n (Auto Picture) mode,
When set to n (Auto Picture) mode,
the optimal capture mode is automatically
selected from U (Standard), c (Portrait),
s
s
(Landscape), b (Macro), . (Night Scene Portrait), K (Sunset),
d
(Blue Sky) or x (Forest). (p.68)
4
Press the shutter release button fully.
The picture is taken.
This action is referred to as “releasing the shutter” or “release”.
This action is referred to as “releasing the shutter” or “release”.
5
Review the captured image on the monitor.
The image appears for 1 second on the monitor shortly after capturing
(Instant Review).
The following operations can be performed during Instant Review.
Available operations
The following operations can be performed during Instant Review.
Available operations
1
d
/i button
Deletes the image. (p.60)
E-dial
Magnifies the image. (p.149)
mc
button
Saves the RAW image. (p.59)
• The shutter sound and the beep that sounds when the image is focused
can be turned off. (p.180)
• You can set the camera so that pressing the d/i button will focus
automatically, in the same way as pressing the shutter release button
halfway. (p.88)
• You can preview the image on the monitor and check the depth of field before
taking pictures. (p.92)
1/
2000
1/
2000 F2.8
F2.8
1600
1600
[ 37]
[ 37]
AF frame
e_kb535_ENG.book Page 53 Wednesday, October 10, 2012 3:03 PM