Pentax Q10 Mode D’Emploi

• Do not clean the camera with organic solvents such as thinner, alcohol, or benzine.

• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower

for cleaning as it may damage the lens.

• Please contact a PENTAX Service Center for professional cleaning of the CMOS

sensor. (This will involve a fee.)

• Periodic inspections are recommended every one to two years to maintain high

performance.

• Do not store the camera with preservatives or chemicals. Storage in high

temperatures and high humidity can cause mold to grow on the camera.

Remove the camera from its case and store it in a dry and well-ventilated place.

• Avoid using or storing the camera where it may be exposed to static electricity

or electrical interference.

• Avoid using or storing the camera in direct sunlight or in locations where it may

be exposed to rapid changes in temperature or to condensation.

• The SD Memory Card is equipped with a write-

protect switch. Setting the switch to LOCK

prevents new data from being recorded on the

card, the stored data from being deleted, and

the card from being formatted by the camera

or computer.

• The SD Memory Card may be hot when removing

the card immediately after using the camera.

• Do not remove the SD Memory Card or turn off the power while the card is being

accessed. This may cause the data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact.

Keep it away from water and store away from high temperatures.

• Do not remove the SD Memory Card while formatting. The card may be damaged

and become unusable.

• Data on the SD Memory Card may be deleted in the following circumstances.

We do not accept any liability for data that is deleted if

1. the SD Memory Card is mishandled by the user.

2. the SD Memory Card is exposed to static electricity or electrical interference.

3. the SD Memory Card has not been used for a long time.

4. the SD Memory Card or the battery is removed while the card is being accessed.

• If the SD Memory Card is not used for a long time, the data on the card may become

unreadable. Be sure to regularly make a backup of important data on a computer.

• Format new SD Memory Cards. Also format SD Memory Cards previously used with

other cameras.

Cleaning Your Camera

Storing Your Camera

Other Precautions

Write-protect

switch

e_kb535_ENG.book Page 5 Wednesday, October 10, 2012 3:03 PM