Pentax MX-1 Mode D’Emploi
159
4
Edi
ting and Pr
ting and Pr
in
ting I
m
m
ages
4
Use the four-way controller (23)
to choose a parameter you want to
change.
to choose a parameter you want to
change.
You can select a different image by turning
the e-dial.
the e-dial.
The following parameters can be changed.
5
Use the four-way controller (45) to change the value.
Press the four-way controller (5) to display the setting screen for
White Balance and Custom Image.
White Balance and Custom Image.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as],
and press the 4 button.
and press the 4 button.
The RAW image is developed and saved as a new image.
8
Use the four-way controller (23) to select [Continue]
or [Exit], and press the 4 button.
or [Exit], and press the 4 button.
Select [Continue] to edit other images. The screen for selecting the
parameter in Step 4 appears again.
parameter in Step 4 appears again.
Parameter
Value
Page
Aspect Ratio
D
/E/F/G
JPEG Recorded Pixels
JPEG recorded pixels corresponding to
the aspect ratio
the aspect ratio
JPEG Quality
Fine/Normal
Custom Image
Bright/Natural/Vibrant/Reversal Film/
Monochrome
Monochrome
White Balance
F
/G/H/^/JD/JN/JW/JL/
I
/L/K
Sensitivity
-1.0 to +1.0
—
Shadow Correction
On/Off
Distortion Corr.
On/Off
100-0001
100-0001
OK
OK
Capture Settings
Capture Settings