Panasonic KXFLB801E Mode D’Emploi
3. Fax
35
8
Press {STOP} to exit.
3.6.4 Sending the same
document to pre-programmed
parties
document to pre-programmed
parties
L
Make sure that the {FAX} light is ON.
1
Insert the document FACE UP into the
feeder.
feeder.
L
Confirm that there are no documents
on the scanner glass.
on the scanner glass.
2
3
Press the desired {BROADCAST} (1-2) or
{
{
MANUAL BROAD}.
L
The document will be fed into the unit and
scanned into memory. The unit will then
send the data to each party, calling each
number sequentially.
scanned into memory. The unit will then
send the data to each party, calling each
number sequentially.
L
After transmission, the stored document
will be erased from memory
automatically, and the unit will
automatically print a report (broadcast
sending report).
will be erased from memory
automatically, and the unit will
automatically print a report (broadcast
sending report).
Note:
L
Do not open the document cover when
sending a fax with the auto document feeder.
sending a fax with the auto document feeder.
L
If you select “
FINE”, “SUPER FINE” or
“
PHOTO” resolution, the number of pages
that the unit can send will decrease.
L
If the document exceeds the memory
capacity, sending will be cancelled.
capacity, sending will be cancelled.
L
If a party is busy or does not answer, it will be
skipped and redialled later up to 5 times.
skipped and redialled later up to 5 times.
To send the same document using the
scanner glass
scanner glass
L
Confirm that there are no documents in
the auto document feeder.
the auto document feeder.
1. Open the document cover.
2. Place the document FACE DOWN, then
close the document cover.
3. Press the desired {BROADCAST} (1-2) or
{
MANUAL BROAD}.
L
To send a single page, skip to step 6.
L
To send multiple pages, go to the next
step.
step.
4. Place the next page.
5. Press {SET}.
L
To send more pages, repeat steps 4 and
5.
5.
6. Press {START}.
To cancel broadcast transmission
1. Press {STOP} repeatedly until “
SEND
CANCELLED?” is displayed.
2. Press {SET}.
Receiving Faxes
3.7 Selecting the way to
use your fax machine
use your fax machine
Depending on your situation, select the way you
prefer to use your fax machine.
–
prefer to use your fax machine.
–
Use only as a fax (FAX ONLY mode)
–
Use mostly as a telephone (TEL mode)
–
Use as a telephone and/or fax (TEL/FAX
mode)
mode)
–
Use with answering machine
3.7.1 Use only as a fax (FAX
ONLY mode)
ONLY mode)
Your situation
You have a separate telephone line just for faxes.
You have a separate telephone line just for faxes.
How faxes are received
All incoming calls will be answered as faxes.
All incoming calls will be answered as faxes.
3.7.2 Use mostly as a telephone
(TEL mode)
(TEL mode)
Your situation
You want to answer calls by yourself. If a fax call
is received, you must receive the fax manually.
You want to answer calls by yourself. If a fax call
is received, you must receive the fax manually.
FLB801E-PFQX2483ZA-en.book Page 35 Friday, March 31, 2006 6:40 PM