Panasonic KXFLB801E Mode D’Emploi

Press {STOP}.

1. Press {RESOLUTION}.

2. Press {V} or {^} repeatedly to select the 

desired resolution.
–

TEXT/PHOTO”: For documents 

containing both text and photographs.

–

TEXT”: For documents containing only 

text.

–

PHOTO”: For documents containing 

photographs, shaded drawings, etc.

L

You can change the default resolution in 
feature #461 (page 64).

You can adjust this setting depending on the 
darkness or lightness of the document. 5 levels 
(light to dark) are available.

1. Press {CONTRAST}.

2. Press {V} or {^} repeatedly to select the 

desired contrast.

L

To make it lighter, press {V}.

L

To make it darker, press {^}.

L

You can save the previous contrast setting in 
feature #462 (page 59).

L

If the {COPY} light is OFF, turn it ON by 
pressing {COPY}.

Set the original.

1. Open the document cover (

1).

2. Place the document FACE DOWN on the 

scanner glass (

2), aligning the top left 

corner of the document to the l mark on 
the unit.

3. Close the document cover.

L

If the original is a thick book, do not 
close the document cover.

If necessary, change the following settings 
according to the type of document.

L

To select the resolution, see page 45.

L

To select the contrast, see page 45.

If necessary, enter the number of copies (up 
to 99).

Press {START}.

L

The unit will start copying.

After you finish copying, press {STOP} to 
reset the settings you set in step 3 and 4.

L

The effective scanning area changes 
according to the setting of the paper size 
(feature #380 on page 59). If you select 
“

LEGAL” for the paper size, the effective 

scanning area will be maximized (page 30).

Press {STOP}.

{

START}

{

STOP}

{

COPY}

2

1

FLB801E-PFQX2483ZA-en.book  Page 45  Friday, March 31, 2006  6:40 PM