Panasonic DP-C322 Mode D’Emploi
11
Chapter 2 Scan to Email
6
Insert a PCMCIA/PC Card Adapter
with a memory card.
with a memory card.
1
Push on the slot cover to open it.
2
Insert a PCMCIA/PC Card Adapter into the
PCMCIA/PC Card slot as illustrated. (Label
side up)
PCMCIA/PC Card slot as illustrated. (Label
side up)
7
Select “PC Card”.
z
Only one storage device can be selected at
a time. When the “PC Card” is selected as a
storage device, the scanned image cannot
be saved to the SD Memory Card or Hard
Disk Drive at the same time.
a time. When the “PC Card” is selected as a
storage device, the scanned image cannot
be saved to the SD Memory Card or Hard
Disk Drive at the same time.
8
Press the Start key.
The scanned image is saved into the
PCMCIA/PC Card.
The Scanned data is saved on the following
directory of the memory card.
PCMCIA/PC Card.
The Scanned data is saved on the following
directory of the memory card.
z
Directory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
z
When scanning from the Platen Glass, place
the next original, and then follow the
instructions described on the touch panel
display.
the next original, and then follow the
instructions described on the touch panel
display.
9
Push the Eject button on the right side
of PCMCIA/PC Card slot, and then
remove the PCMCIA/PC Card Adapter.
of PCMCIA/PC Card slot, and then
remove the PCMCIA/PC Card Adapter.
z
Do not remove the PCMCIA/PC Card while
the Access Indicator is flashing.
the Access Indicator is flashing.
10
Close the Slot Cover.
z
When cancelling the operation, press the Stop key
on the Control Panel, and then select “Yes” on the
Touch Panel Display.
on the Control Panel, and then select “Yes” on the
Touch Panel Display.
Eject button