Panasonic DP-C322 Mode D’Emploi
9
Chapter 2 Scan to Email
6
Insert the SD Memory Card.
1
Push the Slot Cover to open it.
2
Insert the SD Memory Card as illustrated.
(Label side up).
(Label side up).
7
Select “SD Card”.
z
Only one storage device can be selected at
a time. When the “SD Card” is selected as a
storage device, the scanned image cannot
be saved to the PCMCIA/PC Card or Hard
Disk Drive at the same time.
a time. When the “SD Card” is selected as a
storage device, the scanned image cannot
be saved to the PCMCIA/PC Card or Hard
Disk Drive at the same time.
8
Press the Start key.
Scanned image is saved in the following
directory of the SD Memory Card.
directory of the SD Memory Card.
z
Directory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
z
When scanning from the Platen Glass, place
the next original, and then follow the
instructions described on the touch panel
display.
the next original, and then follow the
instructions described on the touch panel
display.
9
Push the SD Memory Card, and then
remove it.
remove it.
z
Do not remove the SD Memory Card while
the Access Indicator is flashing.
the Access Indicator is flashing.
10
Close the Slot Cover.
z
When cancelling the operation, press the Stop key
on the Control Panel, and then select “Yes” on the
Touch Panel Display.
on the Control Panel, and then select “Yes” on the
Touch Panel Display.