Panasonic KXTG1712FX Mode D’Emploi

29

*1 KX-TG1611/KX-TG1711

I cannot use the intercom feature.

L

This feature is shared between the handsets. 
Although the handset displays “Intercom”, this 

feature is not available for this model.

The display is in a language I 
cannot read.

L

Change the display language (page 13).

The handset beeps and/or 8 
displays.

L

Battery needs charging. Fully charge the batteries 
(page 10).

I fully charged the batteries, but
– battery level does not increase or
– the operating time seems to be 

shorter.

L

Clean the battery ends (S, T) and the charge 
contacts with a dry cloth and charge again.

L

It is time to replace the batteries (page 10).

w

 is flashing.

L

The handset is too far from the base unit. Move 
closer.

L

The base unit’s AC adaptor is not properly 
connected. Reconnect AC adaptor to the base unit.

L

The handset is not registered to the base unit. 
Register it (page 31).

Noise is heard, sound cuts in and 
out.

L

You are using the handset or base unit in an area 
with high electrical interference. Re-position the 
base unit and use the handset away from sources of 
interference.

L

Move closer to the base unit.

L

If you use a DSL/ADSL service, we recommend 
connecting a DSL/ADSL filter between the base unit 
and the telephone line jack. Contact your DSL/ADSL 
provider for details.

L

Unplug the base unit’s AC adaptor to reset the unit 
and turn off the handset. Reconnect the adaptor, turn 
on the handset and try again.

The handset does not ring.

L

The ringer volume is turned off. Adjust ringer volume 
(page 16).

TG161x_171xFX(e).book  Page 29  Monday, February 28, 2011  9:11 AM