Panasonic S-ICX Manuel
Section 700 - Operation
Chapter 5. Key Telephone Features
S-ICX-10-700
S-ICX (International) issued January 2000
183
To delete a PSD number:
Hardware Requirements
•
N/A
Considerations
•
PSD number can be dialled from One-Touch keys. (For additional information, see “One-Touch
Keys” on page 177.)
Keys” on page 177.)
•
Storing a new number erases any previously stored data.
•
If the called party’s number and name are stored in the PSD code, that information appears on the
display when you use the speed dial code.
display when you use the speed dial code.
•
Speed dial numbers can contain up to 24 characters. The following table reflects which keys to
use.
use.
5. If you want to check the next PSD number, press the HOLD
key.
6. Replace the handset or press the ON/OFF key.
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. (A) Press the PROG key.
(B) Press the MEMORY key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710
[UK/HK] or 710# [Taiwan, Malaysia, Indonesia]).
[UK/HK] or 710# [Taiwan, Malaysia, Indonesia]).
3. Enter the PSD bin number (80-99).
4. Press the HOLD key.
Cleared Spd Dial displays
5. Replace the handset or press the ON/OFF key.
To indicate. . .
Enter/Press
Shown on Display?
Digit or character
0, 1 - 9, *, #
yes (unless preceded by MEMORY * 2 - see
below)
below)
Intercom Level *
MEMORY * #
no
MCO Code 9 (UK/HK), 0
(Taiwan, Malaysia, Indonesia)
**
(Taiwan, Malaysia, Indonesia)
**
MEMORY * 0
no
MCO Code 81**
MEMORY * 71
no
MCO Code 82**
MEMORY * 72
no
MCO Code 83**
MEMORY * 73
no
MCO Code 84**
MEMORY * 74
no
Pause
FL/R
no
Action
Result