Panasonic DPMC210 Mode D’Emploi
1. Introduction and Installation
12
For assistance, please contact an authorized Panasonic dealer.
4
Remove the orange protector (
5) by pulling it
toward you, then pull it completely out from the unit.
5
Remove the color drum cartridge from the protection
bag.
bag.
L
Remove the shipping tape.
L
Do not remove the monochrome drum cartridge
from the protection bag before installing the color
drum cartridge in step 8.
from the protection bag before installing the color
drum cartridge in step 8.
L
When holding the color drum cartridge, be sure
to handle it over a table to prevent damage
caused by dropping it from a high position.
to handle it over a table to prevent damage
caused by dropping it from a high position.
6
Detach the protective caps (
6), then detach the
upper seal cover by holding the tab (
7).
7
Firmly grip the color drum cartridge (
8) and remove
the protective tray (
9) by sliding it toward you.
L
Do not touch or scratch the green drum surfaces
(
(
j) at the bottom of the drum cartridge.
8
Hold the green lever (
k) of the color drum cartridge
(
l) using your left hand, and hold the front part
using your right hand. Then insert it into the left side
of the unit.
of the unit.
L
Make sure that the arrows (
m) match to insert
the drum cartridge correctly.
5
6
7
8
9
j