Panasonic th-152ux1 Mode D’Emploi
36
Setup menu
SIGNAL menu
Note:
“Signal” setup menu displays a different setting condition for each input signal.
“Signal” setup menu displays a different setting condition for each input signal.
Sync
Signal
H-Freq.
V-Freq.
V-Freq.
kHz
Hz
Hz
63.98
60.02
60.02
Signal Format
1280×1024/60
[ RGB ]
XGA Mode
Auto
Auto
Auto
2
access
1
select
Select the item and set.
3D Settings
Screensaver
Signal
Extended life settings
Input label
Off
PC Power management
Off
Auto power off
Off
OSD Language
English (UK)
Power save
Setup
For RGB
24p SMOOTH FILM
Signal
Off
H-Freq.
Dot Clock Freq.
kHz
MHz
63.98
108.0
V-Freq.
Hz
60.02
3D 24p Film Display
60Hz
[ Digital ]
Signal Format
1280×1024/60
HDMI Range
Auto
For Digital
Input signal display
Displays the frequency and the type of the current
input signal.
This display is valid only for RGB / PC and Digital
input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital
signal input.
input signal.
This display is valid only for RGB / PC and Digital
input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital
signal input.
• XGA Mode
This menu is displayed when the input signal is analog (PC). This unit supports three types of XGA signals with 60Hz vertical
frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
Auto
frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
Auto
1024×768
1280×768
1366×768
Auto: Automatically selected from 1024×768/1280×768/1366×768.
Switch the setting to suit the input signal for better display depends on the angle of view or display resolution condition.
Note:
After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu as
necessary. (see page 22)
Switch the setting to suit the input signal for better display depends on the angle of view or display resolution condition.
Note:
After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu as
necessary. (see page 22)
• Sync
This function operates only during input from PC IN terminal.
Setting RGB sync signal
Confi rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
• SDI Through
Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).
Off
Off
On
On: Enables active through.
Off: Disables active through.
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board
(TY-FB11DHD) is selected.
Off: Disables active through.
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board
(TY-FB11DHD) is selected.
• FRAME CREATION
Displays reducing screen fl icker image for 50Hz/25Hz signal input.
Off
Off
On
Note:
This function activates only for 50Hz/25Hz signal input with 2D images.
This function activates only for 50Hz/25Hz signal input with 2D images.
2
change
1
select