Panasonic th-152ux1 Mode D’Emploi

During 2D or 3D viewing, images captured at 24 
frames per second are provided in a smooth manner.
Off 

Note:
This function can be set only for 24p signal input with 2D 
or 3D images

For 3D images, images captured at 24 frames per second are set.
60Hz 

60Hz: Increases the number of frames to reproduce 

more natural movement images.

48Hz: Reproduces images like fi lm-specifi c.
Note:
This function can be set only for 24p signal input with 3D images.

Negative image : Negative image will be displayed on the screen.
Scrolling bar only : A white bar will scroll from left to right. The image won't be displayed.
Overlay scrolling bar : The brightness of the image will be decreased and a white bar will scroll on it.
White screen : The whole screen will be white.

 

When the input signal is a 4k2k signal, only “Scrolling bar only” and “White screen” can be selected.

Select “Start”.

Screensaver 

Start

Function

Negative image

Screensaver 

Start

Function 

Negative image

3D Settings

Screensaver

Extended life settings

Input label

Off

PC Power management

Off

Auto power off

Off

OSD Language

English (UK)

Power save

Setup

Signal

Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.

Screensaver 

Start

Function 

Negative image

 

2 

 access

1 

 select

2 

 change

1 

 select

The menu screen will disappear and the 
SCREENSAVER will be activated. To stop the 
Screensaver under On, press any button.
Note: When the display is turned off, the 
Scrensaver will be deactivated.

2 

 set

1 

 select

Switches the dynamic range according to the input signal from HDMI 1 and HDMI 2 terminals.
Video(16-235) 

Video(16-235): If the input signal is the video range,  Example: HDMI terminal output for DVD player
Full(0-255): If the input signal is full range,  Example: HDMI terminal output for personal computer
Auto: Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.
Note:
This function can be set only for HDMI 1 and HDMI 2 terminal input.

Enabled only when the signal is input to the 4K SDI IN terminal.
Selects the format of the input signal for the 4K SDI IN terminal.
For 3,840/30p or 3,840/24p signal input:
Auto 

Auto: Automatically selects the signal format according to the input signal.