eWON Flexy Modular Remote Access (C1D2) Guide De Spécification

Flexy Serie100/200

Flexy are available in two series. The Serie 100 doesn’t provide routing 

capability between the LAN and the WAN interface and the Ethernet 

to serial gateway. The Flexy Serie 100 has been designed for Remote 

Data Collection application. The Serie 200 provides full features

Ethernet to Serial Gateways

MODBUS TCP to MODBUS RTU; XIP to UNITELWAY; EtherNet/IP™ to DF1; FINS 

TCP to FINS Hostlink; ISO TCP to PPI, MPI (S7) or PROFIBUS (S7); VCOM to ASCII. 

(Applicable to the serie 200)

Data Acquisition Protocols

MODBUS/RTU, MODBUS/TCP, Unitelway, DF1, PPI, MPI (S7), PROFIBUS (S7), 

FINS Hostlink, FINS TCP, EtherNet/IP™, ISO TCP, Mitsubishi FX, Hitachi EH, 

ASCII. Stored in 2500 internal tags

Alarms

Alarms notification by email, SMS, FTP put and/or SNMP traps.

4 Thresholds : low, lowlow, high, highhigh + deadband and activation 

delay.

Alarm logs in http and via FTP, Alarm cycle: ALM, RTN, ACK and END

Datalogging

Internal data base for data logging (real-time logging and historical 

logging up to 1,000,000 timestamps). Retrieval of the database with files 

transferred by FTP or email

SD card reader

yes, for Ordinary Location

Router

IP filtering, IP forwarding, NAT, Port forwarding, Proxy, Routing table, DHCP 

client. (Applicable to the serie 200)

VPN Tunnelling

Open VPN 2.0 either in SSL UDP or HTTPS

VPN Security

The VPN security model is based on using SSL/TLS for session 

authentication and the IPSec ESP protocol for secure tunnel transport 

over UDP. It supports the X509 PKI (public key infrastructure) for 

session authentication, the TLS protocol for key exchange, the 

cipher-independent EVP (DES, 3DES, AES, BF) interface for encrypting 

tunnel data, and the HMAC-SHA1 algorithm for authenticating tunnel 

data.

Programmable

Script interpreter for Basic language, embedded Java 2 Micro Edition 

environment

Synchronization

Embedded real-time clock, manual setup via http or automatic via NTP

File Management

FTP client and server for configuration, firmware update and data transfer

Website

Embedded web interface with setup wizards for configuration and 

maintenance (no extra software needed). Basic authentication 

(login/password) and session control for security. 

Possibility of uploading custom web GUI. Compatible with viewON3 
web HMI.

User Flash Disk

up to 30MB available for user application

Maintenance

SNMP V1 with MIB2 and/or via FTP files

Mechanicals

Din Rail Mounting

Dimensions: 80 x 89 x 134  mm (H x D x W ); 

Weight: < 500 g

Power supply

12 - 24VDC +/-20%, LPS

Consumption: depending on the extension card installed (see 

Installation guide on our website)

Input/output

2x digital input: 0 to 12/24VDC; 1.5kV isolation

1x digital output: open drain (MOSFET) 200mA; 1.5 kV isolation