eWON Flexy Modular Remote Access (C1D2) Guide De Spécification

Number of ports

1x male SUBD9 serial port RS232/422/485 configurable by dipswitch and 

1x male SUBD9 RS232 serial port with RTS, CTS signals

Frequencies

Pentaband UMTS/HSPA+  modem (800/850, 900, AWS1700, 1900, 2100 MHz)

Quad band GPRS/EDGE (850, 900, 1800, 1900 MHz)

Antenna Connector

Type SMA  - Female

Antenna

Not included in the delivery

Wan connectivity

WiFi: 802.11 b/g/n  WiFi/WLAN client for remote connection

Frequencies

Channels: 1 to 11 ( inclusive )

Security

WPA2, WPA and WEP

Antenna Connecto

Reverse SMA male connector

Antenna

included in the delivery; frequency: 2.4 GHz; impedance: 50 Ohms, 

gain:2.0 dB

Number of inputs/output

Extension card with 8DI, 4AI, 2DO

Range

AI: 0 to 10 VDC - 16 bits, DI: 0 to 12/24 VDC, DO: 3A/24V VAC/VDC

Isolation

AI: 1.5kV from power supply, DI: 1.5 kV from electronic AND power supply, 

DO: 1kV from electronic AND 1.5kV from power supply

Number of inputs/output

Extension card with 8DI, 4AI, 2DO

Range

AI: 0 to 10 VDC - 16 bits, DI: 0 to 12/24 VDC, DO: 24VDC @ 250mA max

Isolation

AI: 1.5kV from power supply, DI: 1.5 kV from electronic AND power supply, 

DO: 1kV from electronic AND 1.5kV from power supply
See control drawing EHW-0070-011-CD for detailled information

Ethernet port

1x RJ45 Ethernet 10/100 base Tx; 1.5kV isolation

Modem standards

V.92/56K, V.34/33.6K, V.32bis/14.4K and V.22bis/2400 bps

Data compression

V.44 and V.42bis, MNP 5

Modem

Telecom approved in more than 50 countries including United States, 

Europe, Japan, China, etc

Connector

RJ11; 2 lines (tip, ring)

Indicator

Front plate LED: Status, Activity

Flexy base module interface

Flexyn01*: 4 x RJ45 Ethernet 10/100MB switch, 1,5kV isolation
Flexyn02*: 1x RJ45 Ethernet 10/100MB, 1 x male SUBD9 serial port 

configurable by software in RS232/485/422, 1.5kV functional isolation 

from power supply
Flexy n03*: 1x RJ45 Ethernet 10/100MB, 1 x female SUBD9 MPI port, 1.5kV 

functional isolation from power supply

*Note: n=1 for the Flexy Serie 100, n=2 for Flexy Serie 200