Cisco 7000 SERIES PA 8 PORT T1 MC ADAPTER WITH CSU DSU Guide De Spécification
C H A P T E R
1-1
Multichannel DS1/PRI Port Adapter Installation and Configuration
OL-3525-03
1
Overview
This chapter describes the Cisco multichannel DS1/PRI port adapters and contains the following
sections:
sections:
•
•
•
•
•
•
•
Port Adapter Overview
The multichannel DS1/PRI port adapter (PA-MC-2T1, PA-MC-4T1, and PA-MC-8T1 versions) is a
single-wide module that integrates channel service unit (CSU) functionality, data service unit (DSU)
functionality, and DS0 channel support into the Cisco router. The PA-MC-8DSX1 version integrates
DS1 data service unit (DSU) functionality and DS0 channel support into the Cisco router.
single-wide module that integrates channel service unit (CSU) functionality, data service unit (DSU)
functionality, and DS0 channel support into the Cisco router. The PA-MC-8DSX1 version integrates
DS1 data service unit (DSU) functionality and DS0 channel support into the Cisco router.
The multichannel DS1/PRI port adapter provides two, four, or eight independent T1 (100-ohm)
connections using RJ-48C connectors. (See
connections using RJ-48C connectors. (See
,
, and
.) Each
multichannel DS1/PRI port adapter can provide up to 128 separate, full-duplex, HDLC DS0, fractional,
or full T1 channels.
or full T1 channels.
Note
Each port adapter has a handle attached, but this handle is not shown in this publication to allow a full
view of the detail on the port adapter faceplate.
view of the detail on the port adapter faceplate.
Figure 1-1
.DS1/PRI Port Adapter Front-Panel View (Two-Port Version Shown)
MULTI-CHANNEL T1/PRI
24621
ENABLED
LINK
1
0
0
1