Infinity Kappa K4 Manuel Du Propriétaire
11. Controller (K2, K4, K5):
Connect the supplied control panel to the amplifier’s Controller connector, as shown in the illustration below. The control panel includes a long
cable and a mounting flange, allowing it to be mounted in a convenient location in the vehicle’s cabin.
cable and a mounting flange, allowing it to be mounted in a convenient location in the vehicle’s cabin.
12. REM (K2, K4):
Connect an 18awg wire from the Remote Out lead of the source unit to the included connector, and then plug the connector into this input (see
illustration below). The REM lead detects signal and instructs the amplifier to turn on/off.
illustration below). The REM lead detects signal and instructs the amplifier to turn on/off.
Kappa remote lead connector
In addition to REM inputs that turn on the amp, there are REM outputs that can be used to turn on other amps. If the amp auto turns on when
detecting a Bluetooth signal or ADAS input, its REM outputs will turn on the other amps as well.
detecting a Bluetooth signal or ADAS input, its REM outputs will turn on the other amps as well.
Remote turn-on lead from source unit
7