Infinity Kappa K4 Manuel Du Propriétaire
KAPPA
13. ADAS Input (K2, K4, K5):
ADAS input channel sequence: 1. FL- 2. FL+ 3. FR- 4. FR+ 5. RL- 6. RL+ 7. RR- 8. RR+
14. Input for firmware updates:
Micro USB input for connecting to a computer for firmware updates, if required. Current software version can be checked by pressing and
holding the Phone End button on remote controller for at least 10 seconds (see 21. Phone End button below). Upgrade mode can be entered by
pressing and holding the Clari-Fi button on remote controller for at least 10 seconds, until all four indicator lights flash for one second (see
29. Clari-Fi button below).
holding the Phone End button on remote controller for at least 10 seconds (see 21. Phone End button below). Upgrade mode can be entered by
pressing and holding the Clari-Fi button on remote controller for at least 10 seconds, until all four indicator lights flash for one second (see
29. Clari-Fi button below).
15. Level meter:
This meter has four rows of LEDs on the top panel of the amp indicating how loudly each channel is playing. (FL = front left, FR = front right,
RL = rear left, RR = rear right.) K5 also has LED meter on top panel for fifth sub channel.
RL = rear left, RR = rear right.) K5 also has LED meter on top panel for fifth sub channel.
16. Power/Protect indicator:
The light will illuminate in white when the amp is receiving power and playing. The indicator will turn red if the amp enters Protect mode in the
event of conditions such as over/under voltage, short circuit, amplifier output circuit failure, excessive heat, and shut itself down. (Find indicator
located on top panel of amp and also on front of remote controller.)
event of conditions such as over/under voltage, short circuit, amplifier output circuit failure, excessive heat, and shut itself down. (Find indicator
located on top panel of amp and also on front of remote controller.)
17. Clari-Fi indicator (K2, K4, K5)
:
The light will illuminate when Clari-Fi has been engaged is applying sound restoration technology to all signals passing through the amp, wired
or wirelessly.
or wirelessly.
18. Party Mode indicator (K2, K4, K5):
The light will illuminate when Party Mode has been engaged (see 26. Party Mode button on remote controller) and multiple paired devices are
able to stream music wirelessly to the amp over Bluetooth.
able to stream music wirelessly to the amp over Bluetooth.
19. Bluetooth
®
indicator (K2, K4, K5):
The light will illuminate when Bluetooth is active and the amp is paired with a compatible device (see 25. Bluetooth Pairing button).
8