Biketronics BT1005X Fairing and Wiring Kit Manuel Du Propriétaire

t Remove outer fairing (Remove fairing bolts and disconnect headlight wire 

connector).

t Remove Harley

®

 glove box or stock radio from fairing. Retain the 4 Allen-

head bolts.

t 96-97 FLH only: Remove cradle used to support Harley

®

 radio.

Failure to disconnect the battery will cause a short to ground and is not 

covered under warranty.

 owners – For easy radio removal and installation, remove 2 top 

nuts and only loosen 2 bottom bolts/nuts on main fairing support bracket.

 owners – Removal of Harley

®

 OEM radio will disable CB-radio 

and intercom functions. Rear speakers will require procedures on pages 16-17.

Care – Avoid direct spray of water on the radio face. Please note that Biketronics 

Inc. is not responsible for any damage due to improper installation and/or 

failure due to water damage. For 1988 and later models, check out Biketronics 

SplashCover at: www.biketronics.com/products/BT-Splashcover.html

Do not modify – The RetroRadio kit is plug–n-play. Do not drill, file or cut. Call 

Biketronics if you are not sure about installation.