Garmin Varia Vision Manuel Du Propriétaire

See the Important Safety and Product Information guide in the 

product box for product warnings and other important 

information.
Always consult your physician before you begin or modify any 

exercise program.

To prevent corrosion, thoroughly clean and dry the contacts and 

the surrounding area before charging or connecting to a 

computer. Refer to the cleaning instructions in the appendix.

The device is powered by a built-in lithium-ion battery that you 

can charge using a standard wall outlet or a USB port on your 

computer.
NOTE: The device does not charge when outside the approved 

temperature range (

).

Align the charger posts with the contacts on the back of the 

device 

À

, and press the charger until it clicks.

Plug the large end of the USB cable into an AC adapter or a 

computer USB port.

Plug the AC adapter into a standard wall outlet.

Charge the device completely.

Pinch the buttons 

Á

 to remove the charger.

À

Power key

Hold to turn the device on and off.

Á

Ambient light 
sensor

Automatically detects available light and adjusts the 
brightness of the display.

Â

Touch panel

Swipe or tap to interact with device (

).

Ã

Display arm

Bend to adjust the display.
NOTE: Bending the display arm more than 90 
degrees, could damage the device.

Ä

Display

Twist to adjust the location of the display.
NOTE: Twisting the display more than 15 degrees, 
could damage the device.

You can use the touch panel to interact with many device 

features. You can operate the touch panel with your finger tip or 

while wearing gloves.
• Swipe the touch panel to scroll through data screens, 

options, and settings.
You can swipe forward and backward.

• Swipe the touch panel to dismiss notifications.
• Swipe the touch panel to acknowledge notifications and 

alerts.

• When On Demand/Alert Only is enabled, double-tap the 

touch panel to wake up and put the device into sleep mode.

Select a band size that fits your sunglasses arm.
NOTE: The band should be tight so the device does not 

move while riding.

Place the flat side of the mount against the sunglasses arm.

Attach the first band on the top hook and pull it around the 

sunglasses arm.

Attach the other side of the band on the bottom hook.

Attach the second band.

Before you can install the device on the mount, you must install 

the mount on your sunglasses arm.

Align the notches on the mount and the device.

Press down slightly and turn the device until it locks into 

place.

Adjust the display in front of the sunglasses lens.

• Select a secure location to mount the device on your 

sunglasses arm, where it does not interfere with the safe 

operation of your bike.

• Select the bands that best fit your sunglasses.
• Install the device correctly.
• Adjust the display before going for a ride.
• Go for a test ride during the day in a safe environment.

• Unfold the sunglasses arms before you adjust the display.
• Place the mount in a location where the display reaches the 

sunglasses lens.

• Bend the display arm.
• Rotate the display.
• Move the mount forward and backward on the sunglasses 

arm.

Introduction

1