Exegin Technologies Limited Q52 Manuel D’Utilisation

63

Q52 Installation and Configuration Guide © Exegin Technologies Limited, 2007

8. Reference Information
Complete Command Reference

These commands change the settings stored in Flash (permanent memory) and do not 
affect the current or working settings in memory. A power cycle is needed before the 
stored settings become current.

Set all network settings back to factory 
defaults.

Store all current network settings to Flash so 
they are retained after a power cycle. This 
ensures all current settings match what is 
stored in Flash.

Set the line speed for the UTP Ethernet 
interface.

Store a static IP address for the Q52.

For example:

Store the IP address of the Domain Name 
Server (DNS) for the Q52.

For example:

Store the domain name suffix for the Q52.

For example:

Set all TCP/IP network settings back to 
factory defaults. 

Store all current TCP/IP network settings to 
Flash so they are retained after a power 
cycle. This ensures all current settings 
match what’s stored in Flash.

Store a default router/gateway defined by 
routerIPaddress so the Q52 knows where to 
direct packets destined for another subnet.

For example: