Exegin Technologies Limited Q53 Manuel D’Utilisation
68
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2009
ix. Extra Features/Additional Information
General Options
General Options
ix
E
XTRA
F
EATURES
/A
DDITIONAL
I
NFORMATION
This chapter provides information about additional features available with the Q53.
•
on page 68: miscellaneous Zigbee gateway bridge device options
•
on page 68: how to use the Q53’s built-in security features as well as
taking advantage of your Network’s security features.
•
General Options
Manipulating the Q53’s UTP Interface
You have some control over the UTP interface and its properties on the Q53.
By default, the UTP interface is set to automatically negotiate the communications speed
and duplex settings with its link peer. You can change this to force the Q53 to use a
specific speed and duplex setting.
and duplex settings with its link peer. You can change this to force the Q53 to use a
specific speed and duplex setting.
To see the current UTP interface settings for the UTP network interface, please see list
ifc in
ifc in
on page 60. To manipulate the UTP interface, please see store ifc in
Remotely Managing the Q53
In a TCP/IP environment, various methods are available for remotely monitoring the
Print Server. These include using:
Print Server. These include using:
•
the built-in HTML forms,
•
a Telnet session,
•
SNMP management.
Q53 Security
This touches upon the most popular built-in security feature - permission levels and
passwords. Setting passwords and assigning a permission level to users makes it difficult
for unauthorized users to gain access to the Q53’s command set and manipulate the
settings.
passwords. Setting passwords and assigning a permission level to users makes it difficult
for unauthorized users to gain access to the Q53’s command set and manipulate the
settings.