Exegin Technologies Limited Q53R6 Manuel D’Utilisation
50
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2013
8. Using HTML Pages to Configure the Q53
Bridge Forms
Bridge Forms
Figure 20—Bridge Settings Form
The Bridge Settings form allows specification of up to four remote ZigBee bridge
devices. The Q53 will attempt to connect to all specified bridge devices to bridge ZigBee
messages to and from the local PAN.
devices. The Q53 will attempt to connect to all specified bridge devices to bridge ZigBee
messages to and from the local PAN.
Remote ZigBee bridge devices are specified by IP address. At least one device should be
specified in order to bridge ZigBee message over the TCP/IP network.
specified in order to bridge ZigBee message over the TCP/IP network.
IP addresses may be specified in dotted quad format, for example:
172.16.16.1
Alternatively, host names may be used to specify the IP address of each bridge device.
The Q53 requires access to a Domain Name Server (DNS) in order for host names to
work. Please refer to
The Q53 requires access to a Domain Name Server (DNS) in order for host names to
work. Please refer to
on page 53 for more details on configuring the
DNS server address.
Hostname 1
At a minimum, the IP address one remote ZigBee bridge device should be entered into
the Hostname 1 field.
the Hostname 1 field.
Default: Unconfigured (blank) IP address.
Hostname 2
Hostname 3
Hostname 4
Hostname 3
Hostname 4
The IP addresses of up to three additional ZigBee bridge devices may be specified, using
the Hostname 2 through Hostname 4 fields respectively.
the Hostname 2 through Hostname 4 fields respectively.