Cypress Semiconductor 3033 Manuel D’Utilisation
PRELIMINARY
CYBT-013033-01
EZ-BT™ Module
Cypress Semiconductor Corporation
•
198 Champion Court
•
San Jose
,
CA 95134-1709
•
408-943-2600
Document Number: 002-18414 Rev. **
Revised January 27, 2017
MNKEZ-BLE™ PRoC™ Module
General Description
The Cypress CYBT-013033-01 is a certified module supporting
dual-mode Bluetooth
dual-mode Bluetooth
®
Classic (BR/EDR) and Bluetooth
®
Low
Energy (BLE) wireless communication standards. The
CYBT-013033-01 is a turnkey solution and includes an onboard
crystal oscillator, PCB trace antenna, passive components, and
Cypress CYW20707 silicon device.
CYBT-013033-01 is a turnkey solution and includes an onboard
crystal oscillator, PCB trace antenna, passive components, and
Cypress CYW20707 silicon device.
The CYBT-013033-01 is a custom RF module design intended
to provide Bluetooth
to provide Bluetooth
Classic and BLE communication, and allow
up to two GPIO connections for system or module wake events.
The CYBT-013033-01 supports UART and BSC (I2C
compatible) serial communication, and allows for interface to the
Apple MFi Coprocessor chip (via the BSC connection).
The CYBT-013033-01 supports UART and BSC (I2C
compatible) serial communication, and allows for interface to the
Apple MFi Coprocessor chip (via the BSC connection).
The Cypress CYBT-013033-01 complies with Bluetooth Core
Specification version 4.2+HS and is designed for use in UART
HCI applications. The combination of the Bluetooth Baseband
Core (BBC), a Peripheral Transport Unit (PTU), and a Cortex-M3
based microprocessor with on-chip ROM provides a lower and
upper layer Bluetooth stack, including Link Controller (LC), Link
Manager (LM), and HCI.
Specification version 4.2+HS and is designed for use in UART
HCI applications. The combination of the Bluetooth Baseband
Core (BBC), a Peripheral Transport Unit (PTU), and a Cortex-M3
based microprocessor with on-chip ROM provides a lower and
upper layer Bluetooth stack, including Link Controller (LC), Link
Manager (LM), and HCI.
Module Features
■
Module size: 10.0 mm × 15.0 mm × 2.25 mm (with shield)
■
Bluetooth dual-mode module, complying with Bluetooth Core
Specification 4.2 including BR/EDR/BLE
Specification 4.2 including BR/EDR/BLE
■
Supports maximum Bluetooth data rates over HCI UART
■
Temperature range: –30 °C to +85 °C
■
ARM
®
Cortex
®
-M3 processor
■
Multiple serial interface options:
❐
UART: HCI interface supporting up to 4 Mbps
❐
BSC (I2C compatible): Supporting 400 kHz clock support
■
Apple MFi Coprocessor interface
■
2 GPIOs
■
Certified to FCC, CE, MIC, and IC regulations
❐
FCC ID: WAP3033
❐
IC ID: 7922A-3033
❐
MIC ID: TBD
■
Bluetooth SIG 4.2 qualified
❐
QDID: TBD
❐
Declaration ID: TBD
Benefits
The CYBT-013033-01 module is provided as a turnkey solution,
including all necessary hardware required to use BR, EDR, and
BLE communication standards.
including all necessary hardware required to use BR, EDR, and
BLE communication standards.
■
Proven, qualified, and certified hardware design ready to use
■
Small footprint (10 × 15 mm × 2.25 mm), perfect for space
constrained applications
constrained applications
■
Fully certified module eliminates the time needed for design,
development and certification processes
development and certification processes
■
Bluetooth SIG qualified with QDID and Declaration ID
■
Multiple serial communication protocol support
■
Interface option for Apple MFi Authentication Coprocessor
■
WICED Studio provides an easy-to-use integrated design
environment (IDE) to configure, develop, program, and test
your application.
environment (IDE) to configure, develop, program, and test
your application.