Godex International Co. Ltd. 6PDL7 Manuel D’Utilisation
3-3. Setting mode
In the Setting Mode, changes can be made according to requirement on the printing mode,
options, media type, and parallel interface (printer can only go into setting when connected to PC
by parallel cable, USB cable, or serial cable).
1.
options, media type, and parallel interface (printer can only go into setting when connected to PC
by parallel cable, USB cable, or serial cable).
1.
Power on the printer and make sure it is on “Ready to print” status.
2.
Press and hold Pause key about 3 to 4 seconds until the buzzer beep 3 times (for product
types that with LCD monitor, the LCD will display “Setting Mode”).
types that with LCD monitor, the LCD will display “Setting Mode”).
3.
In the Setting Mode, the keys have the following functions:
: MINUS / Enter
: MENU / NEXT
: PLUS / Exit
4.
Before exiting the Setting Mode, printer will prompt user whether to save the settings. After
user’s response on whether do or do not save the settings, printer will return to standby
mode.
user’s response on whether do or do not save the settings, printer will return to standby
mode.
Press and hold
key about 3 to 4 seconds until the buzzer beep 3 times and LCD shows
Setting mode. The LCD monitor will show different options on the bottom.
After entering to Setting mode, the first
highlight on LCD monitor indicates the
current item for setting.
highlight on LCD monitor indicates the
current item for setting.
In setting type, the first line indicates the
current item and the second line indicates
current setting.
current item and the second line indicates
current setting.
In adjustment type, the first line indicates the
current item and the second line indicates
current value.
current item and the second line indicates
current value.
Plus: press
key to increase the value
Minus: press
key to decrease the value
Next: press
key to go to next item
DuraLabel 7000 User’s Manual
22