Bently Nevada Inc. 18531001 Manuel D’Utilisation
Section 5 - Installing Hardware
37
3. Tighten the locking screw
on the mounting base
using a 7/64 in. hex
wrench.
using a 7/64 in. hex
wrench.
NOTE
A locking screw is used to prevent the battery
module from accidentally vibrating and
becoming loose from the mounting base.
5.3.4 Connecting Transducers to wSIMs
Transducers are connected to wSIMs using cables.
These are some guidelines for routing and protecting
the cables from damage.
the cables from damage.
Secure the cable at the transducer end and
the wSIM end to protect the cable and the
connectors.
connectors.
Route the cables so that they are not
damaged or cause safety issues.
damaged or cause safety issues.
Secure the cables at regular intervals.
Avoid exceeding the bending radius of the
cable.
cable.