Technologies Humanware Inc. APBT320 Manuel D’Utilisation
BrailleNote Apex QT User Guide
15-367
15.19.7.5 Use of line feed character.
Press N to turn on the appending of a line feed character after a carriage return character is
exported. Press F to turn off appending a line feed character. Appending a line feed character may
be required when exporting to a communication program depending on the program.
exported. Press F to turn off appending a line feed character. Appending a line feed character may
be required when exporting to a communication program depending on the program.
15.19.7.6 Baud Rate.
The baud rate is the speed at which data is transferred between serial devices. Type a new baud rate
value if you know the standard values or press CONTROL with SPACE to cycle through the list of
available values.
value if you know the standard values or press CONTROL with SPACE to cycle through the list of
available values.
15.19.7.7 Parity.
Press N, E or O, for
None, Even or Odd parity respectively. If you are unsure which setting is
correct select none; this is usually preferred for short cables.
15.19.7.8 Number of data bits.
Press 7 or 8 for the number of data bits and press ENTER. Standard ASCII characters use only 7
data bits while extended ASCII characters have 8 bits.
data bits while extended ASCII characters have 8 bits.
15.19.7.9 Handshaking.
The options are S for
Software or H for Hardware. Handshaking determines how the BrailleNote
QT and a host computer control the flow of data from each other. Handshaking is needed if the
BrailleNote QT or host computer cannot keep up with the flow of data when a high baud rate is
selected. BrailleNote QT supports both types of handshaking. You know when it is needed because
large blocks of data are lost when exporting documents or importing files. Try the software option
first if information about the host computer is limited.
BrailleNote QT or host computer cannot keep up with the flow of data when a high baud rate is
selected. BrailleNote QT supports both types of handshaking. You know when it is needed because
large blocks of data are lost when exporting documents or importing files. Try the software option
first if information about the host computer is limited.
15.19.7.10 Transmit delay.
This is the delay between each character when exporting a document. It should be zero when using
a communications program on the host. Where a document is being exported directly into a word
processor or other program, a value from 1 to 5 may be used to allow the word processor to keep
up. Use the smallest value which does not cause characters to be lost.
a communications program on the host. Where a document is being exported directly into a word
processor or other program, a value from 1 to 5 may be used to allow the word processor to keep
up. Use the smallest value which does not cause characters to be lost.
This is the end of the ASCII Translation Options list.