Shenzhen AEE Technology CO. LTD. AEEAP100001 Manuel D’Utilisation

Aerial Photography Equipment

 Professional·Advanced

 

 

- 11 - 

 

Install the batteries in the remote control; slide the power switch rightwards to turn it ON; at this moment, the left 

power indicator (red) turns on, and the right recording indicator (blue) turns off 3s after turning on.   

 

The aerial photography equipment has undergone pairing before delivery, so it is unnecessary to carry out pairing 

again. If paring is indeed necessary, the steps below can be followed: 

1.  Turn on the power switch of the aerial photography equipment; at this moment, the aerial photography equipment 

is started with two “beep” sounds from the motors.   

2.  When the aerial photography equipment makes “beep” sounds, quickly turn on the remote control; the power 

switch indicator (red) turns on; paring begins about 3s after the recording indicator (blue) turns on.   

3.  After successful pairing, the tail light (red) of the aerial photography equipment flashes quickly, and the airborne 

recording indicator (blue) on the remote control turns off.   

4.  Turn off the aerial photography equipment and the remote control. For restart, first power on the remote control 

and then the aerial photography equipment.   

5.  In case of pairing failure, please repeat Step 1~4.     

 

1.  Calibration of accelerometer: Place the aerial photography equipment on a horizontal plane for about 1s; turn the 

joysticks to a lower toe-in shape until all LED lights on the four arms turn off, and then loosen the joysticks; when 

the LED lights turn on again, the calibration of the first plane is finished; the other five planes of the aerial 

photography equipment can be calibrated in the same way.   

 

Turn the left joystick to the lower right corner                        Turn the right joystick to the lower left corner