Essence Security International ltd. ES6500EGE Manuel D’Utilisation
Operation
EverGuard Express
17
5. Using the number keys, enter the master PIN code. The factory default
master PIN code is 1234. The Status LED flashes green and one good beep is
sounded. Programming mode is initiated.
sounded. Programming mode is initiated.
3.5.2
Audible Indicators during Configuration
3.6
Defining Users
The EverGuard Express is provided with one default Master user set as user 1
(PIN code 1234). This user can not be deleted. However, you should change the
PIN code for security reasons.
(PIN code 1234). This user can not be deleted. However, you should change the
PIN code for security reasons.
You can define up to total nine users.
Note: Each user must have a unique PIN code. The number, 0000 can‟t be
used as a PIN code.
used as a PIN code.
To define and edit a user:
1. Insert the Programming tool point into the Programming button. The Status
LED flashes red and one good beep sounds.
2. Using the number keys, enter the master PIN code. The factory default
master PIN code is 1234. The Status LED flashes green and one good beep is
sounded. Programming mode is initiated.
sounded. Programming mode is initiated.
3. Using the number keys, press 01. The Status LED flashes green and one good
beep is sounded.
4. Using the number keys, enter a user number 1 to 9. One good beep is
sounded.
5. Using the number keys, enter 4 digits to be the PIN code. One good beep is
sounded.
To set the user type, using the number keys, press:
1 – for a standard user
2 – for a controlled user
Three beeps confirm that the user is defined. Programming mode
automatically ends and the status LED turns off.
automatically ends and the status LED turns off.
To delete a user:
1. Insert the Programming tool point into the Programming button. The Status
LED flashes red and one good beep sounds.
2. Using the number keys, enter the master PIN code. The Status LED flashes
green and one good beep is sounded. Programming mode is initiated.
3. Using the number keys, press 01. The Status LED flashes green and one good
beep is sounded.