TP-Link Technologies Co. Ltd. TDW8980V1 Manuel D’Utilisation

 

57 

 

You can also keep the default WPS Status as Enabled and click the Add device button in Figure 
4-41, then Choose “Press the button of the new device in two minutes” and click Connect. 
(Shown in the following figure) 

 

Figure 4-42 

Step 2:  Press and hold the WPS button of the client device directly.   
Step 3:  The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup 

process.  

Step 4:  When the WPS LED is on, the client device has successfully connected to the modem 

router.  

Refer back to your client device or its documentation for further instructions. 

Use this method if your client device has a Wi-Fi Protected Setup PIN number. 

Step 1:  Keep the default WPS Status as Enabled and click the Add device button in Figure 4-41, 

then the following screen will appear.   

 

Figure 4-43 

Step 2:  Enter the PIN number from the client device in the field on the above WPS screen. Then 

click Connect button. 

Step 3:  “Connect successfully” will appear on the screen of Figure 4-43, which means the client 

device has successfully connected to the modem router.