Hitachi Kokusai Electric Inc. SL24G-US-02 Manuel D’Utilisation
5. Performing Maintenance From TELNET
5-8 SNMP settings
69
5-8
SNMP settings
5-8-1
Setting the enabling/disabling of the SNMP function
Input format:
snmp switch
Input options
switch
Enables/disables the SNMP function: (default value: enable)
enable
enable
Enables the SNMP function
disable
Disables the SNMP function
Executing user
Administrator
Operation:
Sets the enabling/disabling of SNMP access.
5-8-2
Setting the community name
Input format:
snmp community attribute communityname
no snmp community attribute
no snmp community attribute
Input options
attribute
read-write
Read and write
read-only Read
only
communityname
Community name: 1 to 32 single-byte alphanumeric
characters and symbols.
(Read-write default value: private)
(Read-only default value: public)
(Read-write default value: private)
(Read-only default value: public)
Executing user
Administrator
Operation:
Sets the community name.
To delete the community name setting, add "no" to the beginning of the line.
To delete the community name setting, add "no" to the beginning of the line.
5-8-3
Setting the trap destination
Input format:
snmp trap host ipaddress [ communityname ]
no snmp trap host
no snmp trap host
Input options
host
host1
Trap destination 1
host2
Trap destination 2
ipaddress
IP address: (default value: not set)
communityname
Community name: 1 to 32 single-byte alphanumeric characters and
symbols. (Default value: Not set)
symbols. (Default value: Not set)
Executing user
Administrator
Operation:
Sets the destination for traps. Sets the IP address for the trap destination.
To delete the trap destination setting, add "no" to the beginning of the line.
To delete the trap destination setting, add "no" to the beginning of the line.
5-8-4
Setting the sysContact
Input format:
snmp syscontact sysContact
no snmp syscontact
no snmp syscontact
Input options
sysContact
sysContact: 1 to 255 single-byte alphanumeric characters or symbols.
(Default value: Not set)
(Default value: Not set)
Executing user
Administrator
Operation:
Sets the sysContact.
To delete the sysContact, add "no" to the beginning of the line.
To delete the sysContact, add "no" to the beginning of the line.