Unity Wireless Systems 100-0188-001 Manuel D’Utilisation

 

 

OPERATING & INSTALLATION MANUAL 

190.0002 

OSPREY 35W 869-894MHz CDMA SPCA 

Rev 2

 

 

IM001 Ver 2.0 

 

  

Review this manual and become familiar with all safety markings and instructions. 
Protection provided by the equipment may be impaired if used in a manner not specified by 

Unity Wireless Systems Corp. 

 
INTENED PURPOSES 

This equipment is intended for commercial use in a cellular network basestation and is designed 
to be used in the process of amplifying electromagnetic Radio Frequency (RF) energy. 

Therefore, the output of the amplifier must be connected to an appropriate load, such as an 

antenna or a field-generating device. It is the responsibility of the user to assure that the device 
is operated in a location, which will control the radiated energy such that it will not cause injury 

and will not violate regulatory levels of electromagnetic interference. 
 

The RF voltages on the center pin of the RF output connector can be hazardous. The RF output 
connector should be connected to a load before DC power is applied to the amplifier. Do not 

come into contact with the center pin of the RF output connector or accessories connected to it. 
Place the equipment in a non-operating condition before disconnecting or connecting the load 

to the RF output connector. 

 
PHYSICAL DAMAGE 

The RF amplifier should not be operated if there is physical damage, missing hardware, or 
missing panels. 

 
MAINTENANCE CAUTION 

Adjustment, maintenance, or repair of the equipment must be performed only by qualified 

personnel. Hazardous energy may be present while protective covers are removed from the 
equipment even if disconnected from the power source. Contact may result in personal injury. 

 
 

 

 

 

 

4