Unity Wireless Systems 100-0188-001 사용자 설명서
OPERATING & INSTALLATION MANUAL
190.0002
OSPREY 35W 869-894MHz CDMA SPCA
Rev 2
IM001 Ver 2.0
1.0 Safety Instructions
INSTRUCTIONS FOR SAFE OPERATION
BEFORE APPLYING POWER
Review this manual and become familiar with all safety markings and instructions.
Protection provided by the equipment may be impaired if used in a manner not specified by
Protection provided by the equipment may be impaired if used in a manner not specified by
Unity Wireless Systems Corp.
INTENED PURPOSES
This equipment is intended for commercial use in a cellular network basestation and is designed
to be used in the process of amplifying electromagnetic Radio Frequency (RF) energy.
to be used in the process of amplifying electromagnetic Radio Frequency (RF) energy.
Therefore, the output of the amplifier must be connected to an appropriate load, such as an
antenna or a field-generating device. It is the responsibility of the user to assure that the device
is operated in a location, which will control the radiated energy such that it will not cause injury
is operated in a location, which will control the radiated energy such that it will not cause injury
and will not violate regulatory levels of electromagnetic interference.
HAZARDOUS RF VOLTAGES
The RF voltages on the center pin of the RF output connector can be hazardous. The RF output
connector should be connected to a load before DC power is applied to the amplifier. Do not
connector should be connected to a load before DC power is applied to the amplifier. Do not
come into contact with the center pin of the RF output connector or accessories connected to it.
Place the equipment in a non-operating condition before disconnecting or connecting the load
Place the equipment in a non-operating condition before disconnecting or connecting the load
to the RF output connector.
PHYSICAL DAMAGE
The RF amplifier should not be operated if there is physical damage, missing hardware, or
missing panels.
missing panels.
MAINTENANCE CAUTION
Adjustment, maintenance, or repair of the equipment must be performed only by qualified
personnel. Hazardous energy may be present while protective covers are removed from the
equipment even if disconnected from the power source. Contact may result in personal injury.
equipment even if disconnected from the power source. Contact may result in personal injury.
4