Impinj Inc. XARRAY Manuel D’Utilisation
Speedway Revolution Installation and Operations Guide Octane 4.11
Chapter 1: Introduction
Revision 4.11 Copyright © 2014, Impinj, Inc.
5
user‘s transmit power setting in the same manner as cable loss.
The configuration and use of the antenna hub is described in Appendix D.
The configuration and use of the antenna hub is described in Appendix D.
Speedway xArray
– Integrated Portal Reader
xArray is a high performance RFID reader with an integrated phased array antenna. The
unit can be mounted on a ceiling with power and control through a single Power-Over-
Ethernet (POE) connection.
The xArray is an integrated solution with the maximum Reader-transmit power set at the
factory to comply with country of operation regulations. For example, for operation in the
U.S., the reader transmit power is adjusted such that the xArray radiates a maximum of 4W
EIRP per FCC Part 15.247 guidelines.
unit can be mounted on a ceiling with power and control through a single Power-Over-
Ethernet (POE) connection.
The xArray is an integrated solution with the maximum Reader-transmit power set at the
factory to comply with country of operation regulations. For example, for operation in the
U.S., the reader transmit power is adjusted such that the xArray radiates a maximum of 4W
EIRP per FCC Part 15.247 guidelines.
Requirements for Using Speedway Revolution
Environmental Requirement
Operating temperature: -20º C to +50º C (non-condensing).
Hardware Requirements
• TCP/IP network equipment is required to connect the Reader to a PC (Windows, Mac,
or Linux), or other network terminal.
Figure 1.4 Speedway xArray