Ophir Optronics Ltd QSR Manuel D’Utilisation
Appendix C – Getting the most from the Quasar
Quasar Battery Status Indication
Quasar LED Indicator Information
Status Description Indication
Switching On.
The Quasar is switched on by
pressing the red on/off button
momentarily.
pressing the red on/off button
momentarily.
Blue LED flashes once
for approx. 2 seconds.
for approx. 2 seconds.
Waiting for
connection.
connection.
The Quasar can be detected by
any other Bluetooth device
within range, and is waiting for
a connection request.
any other Bluetooth device
within range, and is waiting for
a connection request.
Blue LED blinks slowly
(once every 2 seconds).
(once every 2 seconds).
Connection
Established.
Established.
StarLab software has detected
the Quasar and has established
a connection to it.
the Quasar and has established
a connection to it.
Blue LED flashes once
for approx. 2 seconds.
for approx. 2 seconds.
Connected.
The Quasar is connected to the
PC and is sending data.
PC and is sending data.
Blue LED blinks quickly.
Battery Low.
Battery voltage is low, below
approximately 20% of its full
capacity. User should connect
charger.
approximately 20% of its full
capacity. User should connect
charger.
Red LED blinks instead
of blue LED, slowly or
quickly in depending on
connection status.
of blue LED, slowly or
quickly in depending on
connection status.
Software
Upgrade.
Upgrade.
StarLab is loading new internal
software into the Quasar
device, using "Upgrade" option
(see Upgrading the Device’s
Internal Software)
software into the Quasar
device, using "Upgrade" option
(see Upgrading the Device’s
Internal Software)
Blue LED blinks quickly
and erratically.
and erratically.
Software Needs
Upgrading.
Upgrading.
An error occurred while
attempting to upgrade the
internal software. The Quasar
was switched off and on again.
The software "Upgrade" must
be repeated. See Upgrading the
Device’s Internal Software.
attempting to upgrade the
internal software. The Quasar
was switched off and on again.
The software "Upgrade" must
be repeated. See Upgrading the
Device’s Internal Software.
Blue LED toggles on for
1 second and off for 1
second repeatedly, to
indicate an error status.
1 second and off for 1
second repeatedly, to
indicate an error status.
Switching Off.
The Quasar can be switched off
by pressing and holding the red
button for approx. 4 seconds.
by pressing and holding the red
button for approx. 4 seconds.
While pressing down the
on/off button, the Blue
LED is on. When the
Quasar powers down, the
LED is extinguished.
on/off button, the Blue
LED is on. When the
Quasar powers down, the
LED is extinguished.
Quasar Off
The Quasar has been powered
off.
off.
LED extinguished.
Table C-1 Quasar LED Indicator Information
Quasar Battery Status Indication
Understanding the Battery Status Indicator
The Quasar contains a rechargeable battery. The status of the battery can be
viewed in StarLab below the logging area of the head channel screen (see Figure
C-3 below).
viewed in StarLab below the logging area of the head channel screen (see Figure
C-3 below).
StarLab User Guide
106