Vieworks Co. Ltd. FXRD-1012NAW Manuel D’Utilisation
Rev.1.0
Page 84 of 151
VW40-152-009
VIVIX-S 1012N User Manual
AP
Checks and sets AP (Access Point) information of SCU.
Item
Description
AP On / Off
Selects whether to use SCU AP (Access Point) mode or not.
On
Turns on SCU AP
Off
Turns off SCU AP
Frequency
Frequency channel of wireless network.
2.4 ㎓
Uses 2.4 ㎓ Frequency. (13 channels)
5 ㎓
Uses 5 ㎓ Frequency. (8 channels)
Country
Country code of using wireless network. (KR, US, EU, JP, CN)
Band
Wireless network bandwidth.
20 ㎒
Default frequency band.
40 ㎒
Expands bandwidth through channel bonding.
Channel
Wireless communication channel
SSID
Unique ID for wireless communication
Key
Unique key for wireless communication (Applied to the password only.)
13 channels can be used in 2.4 ㎓ Frequency.
8 channels can be used in 5 ㎓ Frequency
The number of serviceable channels is different according to the configured country.
Channel bonding is used for enhancing transmission speed. However, the speed may be
slowed down due to the interference of surrounding channels, even if the channels have
been bonded.
slowed down due to the interference of surrounding channels, even if the channels have
been bonded.
Channel items (+/-) will be activated in case of using 40㎒ frequency bandwidth. You can
set whether to bond channels with the above or below one.
set whether to bond channels with the above or below one.
SSID and Key values of the detector communicated with SCU should be set as the same.
Set SSID and Key values not to be duplicated with those of the peripheral system.
SSID and Key values should be input as capital / small alphabet letters, numeric
characters and only “-“, “_” among special letters up to 20.
characters and only “-“, “_” among special letters up to 20.
Wireless network setting should be done by an engineer who understands the wireless
communication and its related technique. Unless the network is set properly, a
communication error would occur or the image quality would be affected.
communication and its related technique. Unless the network is set properly, a
communication error would occur or the image quality would be affected.