CyberPower RMCARD202 Manuel D’Utilisation

 

 

 PowerPanel™ Business Edition 

 

 

 

 

 

 

 

 

 

 

 

       37    

In order for the Client to operate properly, the correct network address of UPS RMCARD, PDU or Agent 

must be assigned for the outlet. The

 Power/Configuration 

page is used to configure the network address of 

UPS RMCARD, PDU or Agent and outlet setup: 

 

In order to establish communication between the Client and the UPS /PDU, the IP address of the UPS 

RMCARD/PDU/Agent must be configured in the Client. 

z  Address: Assigns the network address of the UPS RMCARD/PDU/Agent. Enter the IP address or use 

the pull down to show the device list and select a device address from the list. Clicking the refresh button 

(the icon with the rotating arrow) forces the Client to search the local network for all UPS/PUD and 

update the results in the device list. Click the Apply button to establish communication with the 

UPS/PDU. The Client searches the device with the least uptime to be a default UPS/PDU after an 

installation. Change to another device if the default one is not supplying power to the Client computer.