CyberPower RMCARD202 Manuel D’Utilisation

 

 

 PowerPanel™ Business Edition 

 

 

 

 

 

 

 

 

 

 

 

       39    

The uptime of the PDU indicates the length of time that the device has been functioning. When the Client 

scans the local network and updates the device list, the PDU with the uptime reset will be marked a yellow 

star icon.

 

P

ressing the Reset 

button for 1 second can reset the PDU uptime. Do not press the reset button 

over 4 seconds. Otherwise, all PDU settings will be reset to default state.

 

 

Troubleshooting the Client’s inability to communicate with the UPS, PDU: 

z  Verify the device network address is correct. 

z  Verify the network configuration in the device is correct. The Power Device Network Utility tool can be 

used to configure the device network configuration. The tool can be installed from the tools folder on the 

installation CD. 

z  Verify the settings in Security/Authentication page are correct and match the settings of the device. 

See Security/Authentication for more details. 

z  Check the network status of the UPS RMCARD/Agent/PDU and Clients. 

z 

Verify firewall settings. Port 3052(UDP/TCP), port 8443(TCP), port 162(UDP) and port 53566(UDP) 

should be unblocked. The Client communicates with UPS/PDU on these ports. The installer will 

automatically configure the Windows firewall to allow PowerPanel

®

 Business Edition access through the 

firewall.

 

The following messages may be displayed: 

z  The device address has changed to X.X.X.X. Client updated using the Auto Configure option. The 

IP address of the UPS RMCARD/Agent/PDU has changed to a new one, and the Client has been 

configured to match the new IP Address. 

z  Make sure the device network configuration is accurate. An improper network configuration will 

result in the loss of or failure of communication. To manually establish communication with the Agent, the 

IP address of the Client computer can be assigned to Agent on the UPS/Load page in the Agent.