Wistron Corporation 2008MMAPER6 Manuel D’Utilisation
English
5
Rear View
Camera Lens
Keep the camera lens [8] clear when taking pictures or
recording videos.
recording videos.
Loudspeaker
As a multi-media device, MobileMapper includes a high-
quality loudspeaker [9] used by any voice-based software
application.
quality loudspeaker [9] used by any voice-based software
application.
USB Data Connector
Use this connector [10] to secure the Magellan USB Data
cable onto the receiver. The MobileMapper 6’s USB port is
used exclusively for a connection to a computer via Microsoft
ActiveSync.
cable onto the receiver. The MobileMapper 6’s USB port is
used exclusively for a connection to a computer via Microsoft
ActiveSync.
Battery Compartment
The receiver uses two standard AA batteries, whether
rechargeable or not. To access the battery compartment [11],
loosen the quarter-turn finger screw [12].
rechargeable or not. To access the battery compartment [11],
loosen the quarter-turn finger screw [12].
Side View (Left)
Flashlight Button
The flashlight button [13] has two functions:
• Screen backlight: Press the button shortly to change the
• Screen backlight: Press the button shortly to change the
screen backlight setting. There are five different backlight
levels (off, low, medium, high, very high). Each new short
press on the button allows you to select the next backlight
level.
levels (off, low, medium, high, very high). Each new short
press on the button allows you to select the next backlight
level.
• Flashlight: A long press on this button (about two
seconds) will indefinitely turn on the flashlight. Orientate
the receiver accordingly to use the flashlight. To turn it off,
hold the button pressed until it goes out.
the receiver accordingly to use the flashlight. To turn it off,
hold the button pressed until it goes out.
Hold Slide Switch
Setting the Hold slide switch [14]* to “HOLD” freezes the
screen and makes the stylus and buttons unusable. Use this
button to suspend the use of the receiver and protect it from
any accidental action.
screen and makes the stylus and buttons unusable. Use this
button to suspend the use of the receiver and protect it from
any accidental action.
External Antenna Input
Use the external antenna input [15]* to connect an external
antenna to the receiver. When an external antenna is
connected, the built-in antenna is automatically
disconnected from the receiver input.
antenna to the receiver. When an external antenna is
connected, the built-in antenna is automatically
disconnected from the receiver input.
[8]
[11]
[10]
[12]
[9]
[13]
[14]
[15]