Netgear 10300137 Manuel D’Utilisation
20
|
Chapter 2: Wireless Network Configuration
Mobile Broadband 11n Wireless Router MBR1000
Configuring WEP
Note:
If you use a wireless computer to configure wireless security
settings, you will be disconnected when you click Apply. Reconfigure
your wireless computer to match the new settings, or access the
router from a wired computer to make further changes.
your wireless computer to match the new settings, or access the
router from a wired computer to make further changes.
To configure WEP data encryption:
1.
Log in to the router as described in “Logging In to Your Router” on page
2.
From the main menu, select Wireless Settings to display the Wireless Settings screen.
3.
In the Security Options section, select the WEP (Wired Equivalent Privacy) radio button:
Security Options None
You can use this setting to establish wireless connectivity before
implementing wireless security. NETGEAR strongly recommends
that you implement wireless security.
implementing wireless security. NETGEAR strongly recommends
that you implement wireless security.
WEP
Use encryption keys and data encryption for data security. You can
select 64-bit or 128-bit encryption. See
select 64-bit or 128-bit encryption. See
.
WPA-PSK (TKIP)
Allow only computers configured with WPA to connect to the
router. See
router. See
Security Options
(continued)
(continued)
WPA2-PSK (AES)
Allow only computers configured with WPA2 to connect to the
router. See
router. See
WPA-PSK (TKIP) +
WPA2-PSK (AES)
WPA2-PSK (AES)
Allow computers configured with either WPA-PSK or WPA2-PSK
security to connect to the router. See
security to connect to the router. See
Figure
2-1
Table 3. Wireless Settings (Continued)
Settings
Description